On Oct 18, 2015 10:08 AM, "Matteo Loda" <[email protected]> wrote: > > Hi guys > > I try to send again this topic , so if this is a duplicate I apologize > > I am following this guide: installing-xenomai-on-beaglebone-using-debian-distribution > > They use a bone-debian-7.5-2014-05-14-2gb.img.xz. > > So they have two partition on the SD card Image > > 1) boot partition with zImage files ,they change original debian zImage with xenomai zImage > 2) rootfs partition > > I try to use a 2015 debian image: bone-debian-7.8-2015-03-01-2gb.img.xz > > But I have only a single partition , with a boot folder, in which I have no zImage > > So how could I boot xenomai ? > > I followed another way: build an image. > > I tryed the github.com/beagleboard/image-builder form RobertCNelson , but I obtain, with a 2015 image, a single SD partition. > > Could you tell me how to configure image-builder to build a separated boot partition with the image-builder ? ( 2015 debian image 3.8 kernel)
Pre built image is available here: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FBBB_.28All_Revs.29_Machinekit -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
