Hi Robert, I try to use both the bbb image you linked me and the apt-get procedure. Both work, so thanks a lot guys !
But I don't find xeno_klat.ko , the module for latency test Is there something similar ? Or in this xenomai on the bbb there are no the testing command / modules ? ( for Latency and GPIO exspecially) Thank you 2015-10-19 11:35 GMT+02:00 Matteo Loda <[email protected]>: > For example I have installed xenomai-r78,,, but I don't have x > enomai/testing/xeno_klat.ko . I don't have the latency test in this > version :( > > 2015-10-19 10:57 GMT+02:00 Matteo Loda <[email protected]>: > >> Hi William >> >> Yes I know this , I will test both. So I will see the different >> performance :) >> >> Matt >> >> 2015-10-18 23:04 GMT+02:00 William Hermans <[email protected]>: >> >>> Matteo, >>> >>> Robert's method will get you the whole thing installed, including >>> xenomai "specific" rootfs. Which I'm not all that familiar with, but I've >>> been told this contains xenomai utilities, examples, test suites, and what >>> not. >>> >>> On Sun, Oct 18, 2015 at 12:25 PM, Matteo Loda <[email protected]> >>> wrote: >>> >>>> Thank you very much William ! >>>> >>>> Robert you are more real time than a real time kernel ^^ >>>> >>>> I will try both the way and I will tell you the results >>>> >>>> Have a nice Sunday Evening :) >>>> >>>> Matt >>>> >>>> >>>> >>>> >>>> >>>> 2015-10-18 19:13 GMT+02:00 Robert Nelson <[email protected]>: >>>> >>>>> >>>>> On Oct 18, 2015 10:08 AM, "Matteo Loda" <[email protected]> wrote: >>>>> > >>>>> > Hi guys >>>>> > >>>>> > I try to send again this topic , so if this is a duplicate I >>>>> apologize >>>>> > >>>>> > I am following this >>>>> guide: installing-xenomai-on-beaglebone-using-debian-distribution >>>>> > >>>>> > They use a bone-debian-7.5-2014-05-14-2gb.img.xz. >>>>> > >>>>> > So they have two partition on the SD card Image >>>>> > >>>>> > 1) boot partition with zImage files ,they change original debian >>>>> zImage with xenomai zImage >>>>> > 2) rootfs partition >>>>> > >>>>> > I try to use a 2015 debian >>>>> image: bone-debian-7.8-2015-03-01-2gb.img.xz >>>>> > >>>>> > But I have only a single partition , with a boot folder, in which I >>>>> have no zImage >>>>> > >>>>> > So how could I boot xenomai ? >>>>> > >>>>> > I followed another way: build an image. >>>>> > >>>>> > I tryed the github.com/beagleboard/image-builder form RobertCNelson >>>>> , but I obtain, with a 2015 image, a single SD partition. >>>>> > >>>>> > Could you tell me how to configure image-builder to build a >>>>> separated boot partition with the image-builder ? ( 2015 debian image 3.8 >>>>> kernel) >>>>> >>>>> Pre built image is available here: >>>>> >>>>> >>>>> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FBBB_.28All_Revs.29_Machinekit >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "BeagleBoard" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/beagleboard/5HDjgE4r-9U/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "BeagleBoard" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/beagleboard/5HDjgE4r-9U/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
