Hi William Yes I know this , I will test both. So I will see the different performance :)
Matt 2015-10-18 23:04 GMT+02:00 William Hermans <[email protected]>: > Matteo, > > Robert's method will get you the whole thing installed, including xenomai > "specific" rootfs. Which I'm not all that familiar with, but I've been told > this contains xenomai utilities, examples, test suites, and what not. > > On Sun, Oct 18, 2015 at 12:25 PM, Matteo Loda <[email protected]> > wrote: > >> Thank you very much William ! >> >> Robert you are more real time than a real time kernel ^^ >> >> I will try both the way and I will tell you the results >> >> Have a nice Sunday Evening :) >> >> Matt >> >> >> >> >> >> 2015-10-18 19:13 GMT+02:00 Robert Nelson <[email protected]>: >> >>> >>> On Oct 18, 2015 10:08 AM, "Matteo Loda" <[email protected]> wrote: >>> > >>> > Hi guys >>> > >>> > I try to send again this topic , so if this is a duplicate I apologize >>> > >>> > I am following this >>> guide: installing-xenomai-on-beaglebone-using-debian-distribution >>> > >>> > They use a bone-debian-7.5-2014-05-14-2gb.img.xz. >>> > >>> > So they have two partition on the SD card Image >>> > >>> > 1) boot partition with zImage files ,they change original debian >>> zImage with xenomai zImage >>> > 2) rootfs partition >>> > >>> > I try to use a 2015 debian image: bone-debian-7.8-2015-03-01-2gb.img.xz >>> > >>> > But I have only a single partition , with a boot folder, in which I >>> have no zImage >>> > >>> > So how could I boot xenomai ? >>> > >>> > I followed another way: build an image. >>> > >>> > I tryed the github.com/beagleboard/image-builder form RobertCNelson , >>> but I obtain, with a 2015 image, a single SD partition. >>> > >>> > Could you tell me how to configure image-builder to build a separated >>> boot partition with the image-builder ? ( 2015 debian image 3.8 kernel) >>> >>> Pre built image is available here: >>> >>> >>> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FBBB_.28All_Revs.29_Machinekit >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "BeagleBoard" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/beagleboard/5HDjgE4r-9U/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/5HDjgE4r-9U/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
