For example I have installed xenomai-r78,,, but I don't have x enomai/testing/xeno_klat.ko . I don't have the latency test in this version :(
2015-10-19 10:57 GMT+02:00 Matteo Loda <[email protected]>: > Hi William > > Yes I know this , I will test both. So I will see the different > performance :) > > Matt > > 2015-10-18 23:04 GMT+02:00 William Hermans <[email protected]>: > >> Matteo, >> >> Robert's method will get you the whole thing installed, including xenomai >> "specific" rootfs. Which I'm not all that familiar with, but I've been told >> this contains xenomai utilities, examples, test suites, and what not. >> >> On Sun, Oct 18, 2015 at 12:25 PM, Matteo Loda <[email protected]> >> wrote: >> >>> Thank you very much William ! >>> >>> Robert you are more real time than a real time kernel ^^ >>> >>> I will try both the way and I will tell you the results >>> >>> Have a nice Sunday Evening :) >>> >>> Matt >>> >>> >>> >>> >>> >>> 2015-10-18 19:13 GMT+02:00 Robert Nelson <[email protected]>: >>> >>>> >>>> On Oct 18, 2015 10:08 AM, "Matteo Loda" <[email protected]> wrote: >>>> > >>>> > Hi guys >>>> > >>>> > I try to send again this topic , so if this is a duplicate I apologize >>>> > >>>> > I am following this >>>> guide: installing-xenomai-on-beaglebone-using-debian-distribution >>>> > >>>> > They use a bone-debian-7.5-2014-05-14-2gb.img.xz. >>>> > >>>> > So they have two partition on the SD card Image >>>> > >>>> > 1) boot partition with zImage files ,they change original debian >>>> zImage with xenomai zImage >>>> > 2) rootfs partition >>>> > >>>> > I try to use a 2015 debian >>>> image: bone-debian-7.8-2015-03-01-2gb.img.xz >>>> > >>>> > But I have only a single partition , with a boot folder, in which I >>>> have no zImage >>>> > >>>> > So how could I boot xenomai ? >>>> > >>>> > I followed another way: build an image. >>>> > >>>> > I tryed the github.com/beagleboard/image-builder form RobertCNelson >>>> , but I obtain, with a 2015 image, a single SD partition. >>>> > >>>> > Could you tell me how to configure image-builder to build a separated >>>> boot partition with the image-builder ? ( 2015 debian image 3.8 kernel) >>>> >>>> Pre built image is available here: >>>> >>>> >>>> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#BBW.2FBBB_.28All_Revs.29_Machinekit >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "BeagleBoard" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/beagleboard/5HDjgE4r-9U/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/5HDjgE4r-9U/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
