On Fri, Aug 11, 2017 at 12:40 PM, Jeff Andich <[email protected]> wrote: > > Best news I've heard all week.... > > Just out of curiosity is the BB-X15 that we can order now from DigiKey still > SR2 or was there another revision done on the board/silicon?
It's labeled as Rev C, it's essentially a Rev B with SR2.0 silicon... (SR2.0 fixes the 1GB 2nd phy, on the Rev B (SR1.x) the 2nd phy was limited to 100MB) > I have an am572xEvm which reports to be ES2.0/(?SR2.0?) when SPL/u-boot > boots. Will the rev_a3 device tree for the the ti 572x still run on the > latest BB-X15? > > Reason I ask. A couple of weeks ago, following the instructions on > retrieving and patching u-boot for the BB-X15 from eewiki, I retrieved a > mysterious version of the TI patch set for u-boot which compiled, but > wouldn't boot. It had references to device trees with 'RevC.' I posted up > here, and then re-retrieved/applied the u-boot patch set and those > references to RevC went away, and u-boot ran again on my ES2.0 am572xEvm.. Yeah i still need to fixup our support for the rev_a3 572x evm board. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiw4X313_z9oaFq8PsLiDOKazs7F6hRw2fj1pzUXLU5eQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
