On Sun, Oct 1, 2017 at 5:12 PM, Robert Nelson <[email protected]> wrote: > > > On Sun, Oct 1, 2017 at 4:51 PM, Graham <[email protected]> wrote: >> >> Robert: >> >> OK. I found a Samtec part that will probably fit, but will need to get >> some samples and try it. >> >> The part numbers are already set up in Digikey's system, but not stocked, >> quoting large minimum quantities and three week delivery. >> >> Can you get samples from Samtec? Or, I can call in a favor from the local >> Samtec rep. (He probably can't get sales credit for an end-sale to Digikey.) >> >> These are both 0.195 inch wide (nominal). >> >> 18x2 positions, gold flash on contacts, tin plated solder tabs for through >> hole on PCB. Samtec # ESW-118-12-F-D >> >> or >> >> 18x2 positions, tin plated contacts, tin plated solder tabs for PCB >> through hole. Samtec # ESW-118-12-T-D >> >> I personally prefer gold on gold for signals, but costs a dollar per >> connector more. (Google "tin fretting") > > > Samples ordered.. So I'll check them out... > > I've already tried these: > > https://www.digikey.com/products/en?keywords=S7121-ND > > width: .200 5.08 > > I got them in, with a gap...
Nope, Samtec ESW-118-12-F-D don't work., the leads aren't even long enough to force/bend it.. They actually fit worse then S7121-ND (which have longer lead's thus more bendable) Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiEpUtbwAvew84QOTJ5Q1B1qcim5d6vZ%2BuK6NpNwn62CQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
