On Fri, Oct 6, 2017 at 10:07 AM, Graham <[email protected]> wrote: > I don't know how much time/energy you want to put into this. > > > If the issue is the length of the tab leads, then the Samtec ESW-118-13-F-D > tripples the length of the thru-hole solder tabs relative to the > ESW-118-12-F-D > These Samtec connectors have a spec width of 0.195 inch. > > > The ones that I am having the best luck with are the Amphenol-FCI > connectors. > The through hole pins are thin flat tabs, so it can just move to the side > about 5 or 10 mils without any forcing, unlike a square pin. > No one stocks the 36 position, ( Amphenol FCI 76342-318LF ) > so I am using a pair of 18 position, which are stocked .( Amphenol FCI > 76342-309LF ) > Specified width is 0.200, but I measure 0.198 > > If all you want to do is mount a single small "Click" board they also have > an 8x1 that works fine. > ( Amphenol FCI 75915-308LF )
Oh i'm just documenting it for others, and will add teh best option to the product page.. testing: SAM1204-18-ND today... Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYg8Cb3rAC%3DTEmwreE%2BPXDsk7SqEbK-J7pGj5rNxGwicZw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
