On Fri, Oct 6, 2017 at 12:03 PM, Graham <[email protected]> wrote: > The standard PCB hole for 0.025 inch square pin is typically a 0.035 inch > diameter. > > The Amphenol FCI is not square pin, but flat tab, and can move off center > inside the hole 5 or 10 thousandths (0.1 to 0.25mm) and still stay flat on > the PCB, without any forcing. Which is enough to clear the CPU BGA package. > > I have a Mikro Ethernet click board that plugs in fine, without any apparent > issues. > > Since we are talking about the connector sliding to the side 0.1 to 0.25mm, > I think there is enough tolerance in the male pin locations and flex in the > male pins to deal with this without issues. > > If Robert likes this solution, maybe he can get Digikey to stock the 36 > position connector.
Working on that internally, found another Amphenol FCI that we do stock, in 36 pin: https://www.digikey.com/products/en?lang=en&site=us&KeyWords=609-4507-ND Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjVd%2B%3DGJpz-%3DhZoMGjuNgCgT%3Dr24HvKwTRuxGaEtAaH0Q%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
