Hello, I think I may have figured out my connection issues w/ GND and PRU on Encoder 4 on the BBBlue.
Seth P.S. Time to fly! On Sunday, September 1, 2019 at 2:41:12 PM UTC-5, Mala Dies wrote: > > Hello, > > I have ArduCopter 3.6 on my BBBlue. Everything works and I can fly. Flying > is of no concern right now. I was wondering something. > > ... > > Does the SiP need to become so hot? I was thinking that it must be the RX > that I use w/ my transmitter. I power the RX by the Servo Header Pins (5v). > > ... > > I know that w/ ArduCopter, the people have figured out a nice way of > communicating to the BBBlue via PRU (Encoder 4) from the hardware that I > use. > > Seth > > P.S. If you are using your BBBlue for ArduCopter/ArduPilot stuff in > general, please do not hesitate to post here. Again, my SiP is getting to > hot to handle. bzzt, bzzt! > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/cf081901-5208-4504-9f00-602f28d62e06%40googlegroups.com.
