Hello Again, Here is the link for the BBBlue and ArduCopter: https://youtu.be/cpqV8ubNuGU.
Seth P.S. If you get bored, please pitch in your ideas, e.g. constructive or not! On Tuesday, September 3, 2019 at 1:22:58 PM UTC-5, Mala Dies wrote: > > Hello, > > I think I may have figured out my connection issues w/ GND and PRU on > Encoder 4 on the BBBlue. > > Seth > > P.S. Time to fly! > > On Sunday, September 1, 2019 at 2:41:12 PM UTC-5, Mala Dies wrote: >> >> Hello, >> >> I have ArduCopter 3.6 on my BBBlue. Everything works and I can fly. >> Flying is of no concern right now. I was wondering something. >> >> ... >> >> Does the SiP need to become so hot? I was thinking that it must be the RX >> that I use w/ my transmitter. I power the RX by the Servo Header Pins (5v). >> >> ... >> >> I know that w/ ArduCopter, the people have figured out a nice way of >> communicating to the BBBlue via PRU (Encoder 4) from the hardware that I >> use. >> >> Seth >> >> P.S. If you are using your BBBlue for ArduCopter/ArduPilot stuff in >> general, please do not hesitate to post here. Again, my SiP is getting to >> hot to handle. bzzt, bzzt! >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a0e24057-d227-4531-baac-6d2b674c6e43%40googlegroups.com.
