Hello, I posted the info. on Hackster.io at https://www.hackster.io/functt/a-long-awaited-drone-w-bbblue-and-ardupilot-0ee27b .
Seth P.S. I think it is already posted at that site on beagleboard.org/p. Um...I think the props are backwards or upside down for now. I will keep testing. On Sunday, November 24, 2019 at 7:59:52 AM UTC-6, Jason Kridner wrote: > > If you have any build instructions, it would be great to post them on > beagleboard.org/p. > > On Sat, Nov 23, 2019 at 11:47 PM Mala Dies <[email protected] <javascript:>> > wrote: > > > > Hello Again, > > > > Here is the link for the BBBlue and ArduCopter: > https://youtu.be/cpqV8ubNuGU. > > > > Seth > > > > P.S. If you get bored, please pitch in your ideas, e.g. constructive or > not! > > > > On Tuesday, September 3, 2019 at 1:22:58 PM UTC-5, Mala Dies wrote: > >> > >> Hello, > >> > >> I think I may have figured out my connection issues w/ GND and PRU on > Encoder 4 on the BBBlue. > >> > >> Seth > >> > >> P.S. Time to fly! > >> > >> On Sunday, September 1, 2019 at 2:41:12 PM UTC-5, Mala Dies wrote: > >>> > >>> Hello, > >>> > >>> I have ArduCopter 3.6 on my BBBlue. Everything works and I can fly. > Flying is of no concern right now. I was wondering something. > >>> > >>> ... > >>> > >>> Does the SiP need to become so hot? I was thinking that it must be the > RX that I use w/ my transmitter. I power the RX by the Servo Header Pins > (5v). > >>> > >>> ... > >>> > >>> I know that w/ ArduCopter, the people have figured out a nice way of > communicating to the BBBlue via PRU (Encoder 4) from the hardware that I > use. > >>> > >>> Seth > >>> > >>> P.S. If you are using your BBBlue for ArduCopter/ArduPilot stuff in > general, please do not hesitate to post here. Again, my SiP is getting to > hot to handle. bzzt, bzzt! > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] <javascript:>. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/a0e24057-d227-4531-baac-6d2b674c6e43%40googlegroups.com. > > > > > > -- > https://beagleboard.org/about - a 501c3 non-profit educating around > open hardware computing > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/bfc3bcdb-f514-4b27-b52a-6a90a789278d%40googlegroups.com.
