Hello, I should be able to get to calibration soon. Here is the latest in case you missed it: https://youtu.be/iBMujYvswHY.
Seth P.S. If you have any ideas, shoot! Outside of calibrating things, ESCs and controller, I may be out of ideas. On Sunday, November 24, 2019 at 1:17:46 PM UTC-6, Mala Dies wrote: > > Hello Again, > > The post is basic. I can elaborate some but first things first. I need to > calibrate my radio, ESCs, and some other equipment. > > Seth > > P.S. Although this has been a work in progress, I will continue w/ it and > post my findings soon. > > On Sunday, November 24, 2019 at 7:59:52 AM UTC-6, Jason Kridner wrote: >> >> If you have any build instructions, it would be great to post them on >> beagleboard.org/p. >> >> On Sat, Nov 23, 2019 at 11:47 PM Mala Dies <[email protected]> wrote: >> > >> > Hello Again, >> > >> > Here is the link for the BBBlue and ArduCopter: >> https://youtu.be/cpqV8ubNuGU. >> > >> > Seth >> > >> > P.S. If you get bored, please pitch in your ideas, e.g. constructive or >> not! >> > >> > On Tuesday, September 3, 2019 at 1:22:58 PM UTC-5, Mala Dies wrote: >> >> >> >> Hello, >> >> >> >> I think I may have figured out my connection issues w/ GND and PRU on >> Encoder 4 on the BBBlue. >> >> >> >> Seth >> >> >> >> P.S. Time to fly! >> >> >> >> On Sunday, September 1, 2019 at 2:41:12 PM UTC-5, Mala Dies wrote: >> >>> >> >>> Hello, >> >>> >> >>> I have ArduCopter 3.6 on my BBBlue. Everything works and I can fly. >> Flying is of no concern right now. I was wondering something. >> >>> >> >>> ... >> >>> >> >>> Does the SiP need to become so hot? I was thinking that it must be >> the RX that I use w/ my transmitter. I power the RX by the Servo Header >> Pins (5v). >> >>> >> >>> ... >> >>> >> >>> I know that w/ ArduCopter, the people have figured out a nice way of >> communicating to the BBBlue via PRU (Encoder 4) from the hardware that I >> use. >> >>> >> >>> Seth >> >>> >> >>> P.S. If you are using your BBBlue for ArduCopter/ArduPilot stuff in >> general, please do not hesitate to post here. Again, my SiP is getting to >> hot to handle. bzzt, bzzt! >> > >> > -- >> > For more options, visit http://beagleboard.org/discuss >> > --- >> > You received this message because you are subscribed to the Google >> Groups "BeagleBoard" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> an email to [email protected]. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/a0e24057-d227-4531-baac-6d2b674c6e43%40googlegroups.com. >> >> >> >> >> >> -- >> https://beagleboard.org/about - a 501c3 non-profit educating around >> open hardware computing >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8debc0b3-587f-4987-87d3-08d959f35f02%40googlegroups.com.
