On Wed, May 20, 2020 at 2:54 AM Gwen Stouthuysen <[email protected]> wrote:
> I have the impression that your network is set up for J1939 or CANOpen > (CAN 2.0B) > > when you send a message to a short address (CAN 2.0A) it doesn't get > acknowledged, and this might crash your bus, as the BB will try to send it > till the message is acknowledged.. > Try to send a message to a 29bit address, or add a second can interface > that will acknowledge your messages. (CAN1 on the BB). > > I'm a bit stuck on moving over to J1939, as that requires at least kernel > 5.4, which results in boot issues due the overlay approach as applied in > the Beaglebone OS > The issue with 5.4 should now have been resolved... If you have free time, please re-test and let me know. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjJ4TpHSSmA9R0uL7YRYO3j8KPwv%3Dk74UB%3DCBJs8CTiJA%40mail.gmail.com.
