> Mine looks almost the same as yours, but I don't have the
> 'Sending
> Environment' statements. I'm using an older ssh
> client, 0.9.8d, but a
> newer sshd, 0.9.8k.
>
> debug2: channel 0: request x11-req confirm 0
> And the absence of error messages indicates that it should
> be OK.
>
> ...
>
> Just checked a system where the X libraries were never
> built and the ssh
> output is the same, except DISPLAY is not set.
>
> Try running (on the server) /usr/sbin/sshd -d -p30
>
> Then from another window on the client ssh -X -p30 server
>
> You should be able to see sshd entries in /var/log/,
> probably auth.log
> as well as the other window.
>
>
> This is what your normal output should look like:
>
> $ echo $DISPLAY
> localhost:10.0
> $xclock &
> [1] 1349
> debug1: client_input_channel_open: ctype x11 rchan 3 win
> 65536 max 16384
> debug1: client_request_x11: request from 127.0.0.1 46510
> debug2: fd 7 setting O_NONBLOCK
> debug1: channel 1: new [x11]
> debug1: confirm x11
> debug2: channel 1: rcvd eof
> debug2: channel 1: output open -> drain
> debug2: channel 1: obuf empty
> debug2: channel 1: close_write
> debug2: channel 1: output drain -> closed
> debug1: channel 1: FORCE input drain
> debug2: channel 1: ibuf empty
> debug2: channel 1: send eof
> debug2: channel 1: input drain -> closed
> debug2: channel 1: send close
> debug2: channel 1: rcvd close
> debug2: channel 1: is dead
> debug2: channel 1: garbage collecting
> debug1: channel 1: free: x11, nchannels 2
>
> [1]+ Done
> xclock
>
> -- Bruce
Finally it worked. I did rebuilt ssh, installed clean sshd_config and
ssh_config, made the changed to the new sshd_config Bruce listed and when I
logged in DISPLAY was correctly set! Thanks everyone.
greg
--
http://linuxfromscratch.org/mailman/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
