Get this...The guy that owns this car just told me that the oil light has been 
on for 4,000 miles! And if that isn't bad enough, he decided not to replace the 
sending unit now.  He said that with the price of gasoline now, he will just 
let it be since his wife won't drive it with the light on.  It never seases to 
amaze me!


  ----- Original Message ----- 
  From: Bob Kennedy 
  To: [email protected] 
  Sent: Monday, January 07, 2008 21:29
  Subject: Re: [BlindHandyMan] Dodge Intrepid


  I worked for Dodge but I don't remember if that is a spade or ring connector. 
You may have to work at it when it is a bit warm to break it loose. 

  Unfortunately a sending unit may not be the fix though. That is the easiest 
to change out though. Beyond that there are a few items that cost a little bit 
to replace if the engine hasn't warn out as a result. Keep working at the 
sending unit for a little while but listen for any new noises in the engine.

  ----- Original Message ----- 
  From: NLG 
  To: [email protected] 
  Sent: Monday, January 07, 2008 3:25 PM
  Subject: Re: [BlindHandyMan] Dodge Intrepid

  I will have to keep trying. I tried pulling it off but it won't release. I 
tried feeling to see if there was a place to push on to get it to release but 
like I said, it is in very tight quarters. There isn't any oil leaking from the 
sending unit so it is clean. I am replacing it because the oil light is 
illuminated and won't go out. The engine oil level inddicates full on the dip 
stick.

  Thanks. 
  ----- Original Message ----- 
  From: Larry Stansifer 
  To: [email protected] 
  Sent: Monday, January 07, 2008 15:16
  Subject: RE: [BlindHandyMan] Dodge Intrepid

  Should just be a male/female push on connector. If it has been leaking for a
  while the wire and/or the connector will probably break off in your hand,
  but that is an easy fix.

  -----Original Message-----
  From: [email protected] [mailto:[EMAIL PROTECTED]
  On Behalf Of NLG
  Sent: Monday, January 07, 2008 12:34 PM
  To: [email protected]
  Subject: [BlindHandyMan] Dodge Intrepid

  Any Dodge boys here? What kind of release is on the wire that attaches to
  an oil sending unit on a 2000 Dodge Intrepid? with the 2.2 engine? It is
  Hard to get at and when I finally get my fingers on it, I have very little
  room to maneuver.

  Thanks.

  To listen to the show archives go to link http://acbradio.org/handyman.html
  or ftp://ftp.acbradio.org/acbradio-archives/handyman/

  The Pod Cast address for the Blind Handy Man Show is.
  http://www.acbradio.org/news/xml/podcast.php?pgm=saturday

  Visit The Blind Handy Man Files Page To Review Contributions From Various
  List Members At The Following address:
  http://www.jaws-users.com/JAWS/handyman/

  Visit the archives page at the following address
  http://www.mail-archive.com/[email protected]/ 

  If you would like to join the JAWS Users List, then visit the following
  address for more information: http://www.jaws-users.com/ For a complete list
  of email commands pertaining to the Blind Handy Man list just send a blank
  message to: [EMAIL PROTECTED] 
  Yahoo! Groups Links

  -- 
  BEGIN-ANTISPAM-VOTING-LINKS
  ------------------------------------------------------

  Teach InfoWest Spam Trap if this mail (ID 149331993) is spam:
  Spam:
  https://spamtrap.infowest.com/canit/b.php?i=149331993&m=0094609f6423&c=s
  Not spam:
  https://spamtrap.infowest.com/canit/b.php?i=149331993&m=0094609f6423&c=n
  Forget vote:
  https://spamtrap.infowest.com/canit/b.php?i=149331993&m=0094609f6423&c=f
  ------------------------------------------------------
  END-ANTISPAM-VOTING-LINKS

  [Non-text portions of this message have been removed]

  [Non-text portions of this message have been removed]



   

[Non-text portions of this message have been removed]

Reply via email to