It doesn't 
  ----- Original Message ----- 
  From: NLG 
  To: [email protected] 
  Sent: Saturday, April 26, 2008 18:23
  Subject: Re: [BlindHandyMan] do you really want to be a plumber?


  Where do you live?

  I ask because here in the United States, I can't believe that soldering "any" 
gas line would pass code.

  ----- Original Message ----- 
  From: martin webster 
  To: [email protected] 
  Sent: Saturday, April 26, 2008 15:52
  Subject: RE: [BlindHandyMan] do you really want to be a plumber?

  Hi,
  The most accurate way of testing for leaks is with a water or digital 
manometer. At the gas meter and within a gas appliance there are small brass 
plugs which you use for perging the pipe work and appliance of gas. These are 
all so used to run pressure tests. you would undo one of these and attach your 
manometer and repressurize the line. Once the line or appliance is at it's 
required working pressure, *usually milly bars) you would then shut off the gas 
and watch for pressure drop. if there is a leak even a minnute leak, you will 
see the water drop down the scale on the manometer. My sighted girl friend 
checks the manometer for me. There are all so really good gas leak testers 
which are hand held and audible, and there's all so your nose. I have both 
manometer and gas leak tester which I can use to go round any joins I have 
soldered. Of course I have a nose too, but the manometer and tester are much 
more accurate, the tester being able to
  detect as litttle as 30 parts gas per one million parts of air which is the 
industry standard, the tester is of course variable and the manometer being 
able to measure pressure in milly bars, so both pieces of iquipment used in 
conjunction with one another is the way a gas fitter would do this. The 
manometer for testing a whole line or appliance, and the tester for finding any 
leaks. Tip, when replacing the brass test plugs use a little gas ceal. This is 
like a grease which gas fitters use, and it's all so good for insuring a good 
ceal on the rubber hose that attaches the manometer to the line you are 
testing. The test that Cy speaks about is known as the old match test and 
indeed is a reliable way of testing for small leaks, the danger with this test 
is you may get a build up of gas, and you can have a flash I do know of people 
who still use it though. The flash point for gas or a build up of gas in any 
given size room is five percent. Hope this
  helps.
  Martin Webster.
  >From the UK.

  --- On Sat, 4/26/08, Cy Selfridge <[EMAIL PROTECTED]> wrote:
  From: Cy Selfridge <[EMAIL PROTECTED]>
  Subject: RE: [BlindHandyMan] do you really want to be a plumber?
  To: [email protected]
  Date: Saturday, April 26, 2008, 6:59 PM

  David,

  Now, I know you are going to think that I am a liar - but - one of the local

  plumbers tests for leaks by lighting a rolled newspaper and passes it around

  the new connection. The first time I saw him do this I was headed for some

  other place to be!

  I suppose that so long as there was not a build up of gas this is probably

  safe but, no thanks folks.

  The soap you spoke of is something like Dawn dishwashing soap. It will do a

  great job of bubbling up if there is a leak.

  Cy, the Ancient Okie.... 

  _____ 

  From: blindhandyman@ yahoogroups. com [mailto:blindhandyman@ yahoogroups. com]

  On Behalf Of David Ferrin

  Sent: Saturday, April 26, 2008 7:12 AM

  To: blindhandyman@ yahoogroups. com

  Subject: Re: [BlindHandyMan] do you really want to be a plumber?

  How do you test for a gas leak my friend? I've watch plumbers rub soap on 

  the connections and look for bubbles.

  David Ferrin

  www.jaws-users. -com

  ----- Original Message ----- 

  From: "martin webster" <HYPERLINK

  "mailto:webstermart in%40yahoo. com"webstermarti [EMAIL PROTECTED] com>

  To: <HYPERLINK

  "mailto:blindhandym an%40yahoogroups .com"blindhandym [EMAIL PROTECTED] -com>

  Sent: Saturday, April 26, 2008 6:59 AM

  Subject: [BlindHandyMan] do you really want to be a plumber?

  > Hi,

  > I think the answer to this question is yes and know. Plumbers work on 

  > many different

  > sites and in many different locations in one week, and this you would have

  > a problem

  > with as a totally blind individual. I do much work for family and good 

  > friends, and the kind of work I do is plumb

  > in washing machines, dish washers, move radiators, move sinks, install 

  > outside taps,

  > and much more. You could certainly learn to master many of the techniques 

  > involved

  > in plumbing even soldering won't be a problem if you feel you can cope 

  > with it.

  > There are different levels of training for this profession and not all 

  > plumbers take

  > them all, for instance if you want to train to install and maintain gas 

  > appliances

  > such as fires, boilers, kilns and spa systems, then that's a different 

  > level of

  > training again. I do all the maintance myself On my own combination 

  > theating and

  > hot water system, and then pay to have it gas tested after woulds. I all 

  > so have a carbonmonoxcide detector installed near the appliance. Safety 

  > is Paramount when dealing with gas. I have never

  > had a problem though working in this way, and feel totally comfortable 

  > doing this type of

  > work as a totally blind man. Again, with soldering I have know problems, 

  > I use a

  > T500 turbo torch which burns butane, propane, or mapp gas depending on 

  > what I'm doing.

  > Just use really good turbo mats and I mean really good ones and you will 

  > be fine. All so remember to totally purge any gas pipe work that you are 

  > about to solder, I kid you not.

  > Again I feel very comfortable with this kind of work and tooling, and I 

  > cannot stress this

  > enough. If your not comfortable with any of this forget the whole thing. 

  > I do own a water filled manometer, which my sighted girl friend reads to

  > me, and this I use for checking gas pressures. The talking multimeter 

  > from

  > Germany

  > can check pressures, but I don't know how useful it would be for this type

  > of work.

  > I've never examined one so I couldn't say. So to sum all this up, you 

  > could learn to do the work in an environment you new, and to a very high 

  > standard too, but I think not in the real world. Hope this helps a 

  > little.

  > Regards.

  > Martin Webster.

  > From the UK.

  >

  >

  > 

  > ____________ -________ _-_______ __-______ ___-_____ ____-____ _____-_

  > Be a better friend, newshound, and

  > know-it-all with Yahoo! Mobile. Try it now. 

  > HYPERLINK

  "http://mobile. yahoo.com/ ;_ylt=Ahu06i62sR 8HDtDypao8Wcj9tA 
cJ"http://mobile. -y

  ahoo.com/-;_ ylt=Ahu06i62sR- 8HDtDypao8Wcj9tA -cJ

  >

  > ------------ --------- --------- ---------

  >

  > To listen to the show archives go to link

  > HYPERLINK

  "http://www.acbradio .org/pweb/ index.php? module=pagemaste r&PAGE_user_ 
op=view_

  page&PAGE_id= 33&MMN_position= 47:29"http://www.acbradio -.org/pweb/ 
-index.php?

  -module=pagemaste- r&PAGE_user_ -op=view_ page&-PAGE_ id=33&-MMN_ position= 
-47:29

  > Or

  > HYPERLINK

  "ftp://ftp.acbradio. org/acbradio- archives/ handyman/"ftp://ftp.acbradio. 
-org/

  acbradio--archives/ -handyman/

  >

  > The Pod Cast address for the Blind Handy Man Show is.

  > HYPERLINK

  "http://www.acbradio .org/news/ xml/podcast. 
php?pgm=saturday"http://www.acbrad

  io-.org/news/ -xml/podcast. -php?pgm= saturday

  >

  > Visit The Blind Handy Man Files Page To Review Contributions From Various 

  > List Members At The Following address:

  > HYPERLINK

  "http://www.jaws- users.com/ JAWS/handyman/"http://www.jaws- -users.com/ 
-JAWS/h

  andyman/

  >

  > Visit the archives page at the following address

  > HYPERLINK

  "http://www.mail- archive.com/ blindhandyman@ yahoogroups. 
com/"http://www.mail-

  -archive.com/ -blindhandyman@ -yahoogroups. -com/

  >

  > If you would like to join the JAWS Users List, then visit the following 

  > address for more information:

  > HYPERLINK "http://www.jaws- users.com/"http://www.jaws- -users.com/

  > For a complete list of email commands pertaining to the Blind Handy Man 

  > list just send a blank message to:

  > HYPERLINK

  "mailto:blindhandym an-help%40yahoog roups.comYahoo" blindhandyman- [EMAIL 
PROTECTED]

  roups-.comYahoo! Groups Links

  >

  >

  >

  > 

  No virus found in this incoming message.

  Checked by AVG.

  Version: 7.5.524 / Virus Database: 269.23.4 - Release Date: 4/23/2008 12:00

  AM

  No virus found in this outgoing message.

  Checked by AVG. 

  Version: 7.5.524 / Virus Database: 269.23.4 - Release Date: 4/23/2008 12:00

  AM

  [Non-text portions of this message have been removed]

  __________________________________________________________
  Be a better friend, newshound, and 
  know-it-all with Yahoo! Mobile. Try it now. 
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

  [Non-text portions of this message have been removed]



   

[Non-text portions of this message have been removed]

Reply via email to