the part I am having now R J is that handle is not just coming off.
not sure if it is because of the hard water that set up the faucet or
not. there is plenty of room underneath it to pry but..
On Mon, Nov 30,
2009 at 06:20:41PM -0500, RJ wrote:
> It been a while since I had a 2 handle Delta. If my memory serves me right.
> Turn off the water to the faucet. Remove the screw that holds the handle.
> Remove the handle. There should be a retaining nut under the handle. Remove
> it. You might need to pry up on the stem to get it out of the casing. I use
> to replace the handle back on the stem, put the screw back on and tap gently
> to get the stem loose, if I had to.
> RJ
> ----- Original Message -----
> From: Lee A. Stone
> To: Blind Handyman
> Sent: Monday, November 30, 2009 17:48
> Subject: [BlindHandyMan] delta kitchen faucets
>
>
>
>
>
> I am preparing for surgery on a older model two handle delta fauct.
> the cold water side leaks from undr the handle and it really pours
> out if you turn on that handle. so the screw is out of the top. How
> does one lift up the handle . does it need some type of puller ? can it
> be pried off with two screwdrivers ? we now have a new Lowes and if
> need be there is a different hardware store some 12 miles North of here.
> worst case senerio we will install a new one. thanks Lee
>
> --
> Even if you're on the right track, you'll get run over if you just sit
> there.
> -- Will Rogers
> .
>
>
>
>
> [Non-text portions of this message have been removed]
>
--
Even if you're on the right track, you'll get run over if you just sit there.
-- Will Rogers
.
