Yes, Dave is right about that. I spent $25 on a biglong wrench, and $45 on the biggest channel-loks they make.Both tools I never needed for any other use. The boiler won't fit into a vice or anything reasonable - I checked. Dennis
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of zoltz Sent: Monday, March 01, 2010 8:05 AM To: Brewtus Subject: Re: Leak > > My machine also has those big holes under both boilers, however, ths > situation would be the same. How to securely hold the boiler while you > try either to remove or tighten the heating element? > you need 2 people and a VERY large pair of channelocks AND a very large SOCKET wrench, All of which will cost more than taking it to a competent repair place. d -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
