Copy that, thanks for the explanation! bmc On Dec 2, 2010, at 12:23 PM, Todd Salzman wrote:
> When the lever is all the way down the brewing system is closed. The group > head is open through the blow off tube into the trip tray. But the boiler is > sealed or water would run right out and that would be bad for all kinds of > reasons. When you raise the lever it opens the brew boiler to the brew group. > > Todd Salzman > Whole Latte Love > > > Todd, are you sure about your statement pertaining to brew pressure? I > thought that was only true of the steam boiler. How can the brew pressure > circuit build pressure when it's an open circuit, i.e. with the lever all the > way down? > > tx, > bmc > > On Dec 2, 2010, at 11:16 AM, Todd Salzman wrote: > > > Howard, > > > > Each machine is tested extensively at our location. The brew pressure and > > the steam pressure are set. We also check all the fitting inside and verify > > that they are perfect. It sound like when it was put together the tube got > > kinked. I am very sorry about that. > > > > Also in regards to the brew pressure. It is perfectly normal for the Brew > > Pressure gauge to show pressure either high or low, at anytime, even while > > sitting idle. As the water in the boiler heats pressure builds up. > > > > Please keep my mobile number that I sent to you and use it anytime you have > > questions. > > > > Thanks > > > > Todd Salzman > > Whole Latte Love > > > > -- > > You received this message because you are subscribed to the Google Groups > > "Brewtus" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > > http://groups.google.com/group/brewtus?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/brewtus?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/brewtus?hl=en. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
