Ah, I don't have any filter in the reservoir, so that explains why I didn't 
know it :)

via iPhone

On Dec 24, 2011, at 5:39 PM, Liys <[email protected]> wrote:

> again what I meant by the tubes going into the reservoir is the hose. :D 
> sorry my bad english. 
> -- 
> Regards, 
> Liys 
> 
> ----- Original message ----- 
> > No luck so far. I got some pressure build with the blind PF this morning, 
> > but just that once. I tried the turkey baster thing, assuming I did it 
> > right (I put the hose on the end of the baster and tried pushing water 
> > in, but it wouldn't go). 
> > 
> > Liys, I'm not sure what filter would be floating on the water - I might 
> > just be dense, so clue me in with a bit more detail :) 
> > 
> > I do get pressure and steam from the steam wand, and hot water flows 
> > nicely from the hot water spout, so this seems specific to the group 
> > head/main pump area. 
> > 
> > On Fri, Dec 23, 2011 at 11:31 PM, Liys <[email protected]> wrote: 
> > 
> > > ** 
> > > 
> > > this is exactly what happened with mine when I got it shipped all the 
> > > way from germany to Indonesia. I googled, nothing of those solutions 
> > > fixed my problem. Untill I inspected closely, and I found the filter 
> > > was floating on top of the water. I took a wooden stick to push the 
> > > filter to the bottom, hit the lever, in a few seconds, it worked like 
> > > should be. you may need to keep do so untill the filter completely 
> > > soaked. other wise it will float again. this simple trick works for 
> > > mine. hope to you as well. Yandi Srigede 
> > > -- 
> > > Regards, 
> > > Liys 
> > > 
> > > ----- Original message ----- 
> > > > I just got my BII back from WLL, where it got a new pump, and various 
> > > > other repairs. I filled the water tank, inserted the tubes, turned 
> > > > the machine on. Per the manual, I then lifted the brew lever.  It 
> > > > seems to suck in some water, but I don't get much of a stream coming 
> > > > out of the group head, so it seems like the pump isn't priming?  The 
> > > > steam wand seems to work just fine, and the hot water spout works. I 
> > > > left the brew lever on for several minutes. Is there something else 
> > > > I might need to do, or any suggestions on this?  I can call WLL of 
> > > > course, but given it's 8pm PST on a Friday, going into a holiday 
> > > > weekend…  Hoping for espresso for the holidays... 
> > > > 
> > > > -- 
> > > > Chris Bailey 
> > > > [email protected] 
> > > > @chrisrbailey 
> > > > 
> > > > -- 
> > > > You received this message because you are subscribed to the Google 
> > > > Groups "Brewtus" group. To post to this group, send email to 
> > > > [email protected]. To unsubscribe from this group, send email 
> > > > to [email protected]. For more options, visit this 
> > > group 
> > > > at http://groups.google.com/group/brewtus?hl=en. 
> > > > 
> > > 
> > > -- 
> > > You received this message because you are subscribed to the Google 
> > > Groups "Brewtus" group. 
> > > To post to this group, send email to [email protected]. 
> > > To unsubscribe from this group, send email to 
> > > [email protected]. 
> > > For more options, visit this group at 
> > > http://groups.google.com/group/brewtus?hl=en. 
> > > 
> > 
> > 
> > 
> > -- 
> > Chris Bailey 
> > [email protected] 
> > @chrisrbailey 
> > 
> > -- 
> > You received this message because you are subscribed to the Google 
> > Groups "Brewtus" group. To post to this group, send email to 
> > [email protected]. To unsubscribe from this group, send email to 
> > [email protected]. For more options, visit this group 
> > at http://groups.google.com/group/brewtus?hl=en. 
> > 
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Brewtus" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to 
> [email protected].
> For more options, visit this group at 
> http://groups.google.com/group/brewtus?hl=en.

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/brewtus?hl=en.

Reply via email to