Yeah I had a problem getting the finder switch out using de-solder braid but got away with it.
I've already checked pin dimensions and like you say, looks standard. Many thanks, sorry to keep pestering you. On Wednesday, 9 January 2013 21:08:59 UTC, Ira wrote: > > At 12:15 PM 1/9/2013, you wrote: > >So the fact the Transformer is putting nothing out when warm is that > >not the answer? > > > Of course that's the problem, I just missed where you said that. > > I think I got my spares from Mouser.com or maybe Digikey.com, but the > one's I have are for a different controller. as long as the specs are > exactly the same and the size and pins are the same you should be > good. Just be very careful getting it out. If you pull the plating > from the hole when you remove it, you'll have a problem. I have a > desoldering tool with a built in vacuum pump that makes it really > easy, before that sometime it was really hard. > > Ira > > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To view this discussion on the web visit https://groups.google.com/d/msg/brewtus/-/zi1rYeHSxBMJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
