Pardon me for living in a recession, send me the 150 and I'll buy a new one. Lol indeed. On 12 Jan 2013 16:34, "dave b" <[email protected]> wrote:
> Incredible amount of jerking off over a $150.00 part. > > Crazy. > > but it gives you all something to do. LOL! > > On Wed, Jan 9, 2013 at 3:27 PM, Ira <[email protected]> wrote: > >> At 01:34 PM 1/9/2013, you wrote: >> >> Many thanks, sorry to keep pestering you. >>> >> >> Glad we found the problem. You should probably replace that 100 ohm >> resistor when you get a chance. If you can't work with SMD stuff, just pull >> that one off and put a 1/2 or 1 watt one with wires in it's place. The pads >> are big enough it's shouldn't be to hard. I'm guessing it's 1/2 watt, but >> you might physically measure it and see what it likely is. I think it's a >> 1210 size but I don't usually work with stuff that big so I might be way >> off. And if you're not sure, more watts is safer. >> >> And, it's not a bother. >> >> >> Ira >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to brewtus+unsubscribe@** >> googlegroups.com <brewtus%[email protected]>. >> For more options, visit this group at http://groups.google.com/** >> group/brewtus?hl=en <http://groups.google.com/group/brewtus?hl=en>. >> >> > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/brewtus?hl=en. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
