At 12:15 PM 1/9/2013, you wrote:
So the fact the Transformer is putting nothing out when warm is that
not the answer?
Of course that's the problem, I just missed where you said that.
I think I got my spares from Mouser.com or maybe Digikey.com, but the
one's I have are for a different controller. as long as the specs are
exactly the same and the size and pins are the same you should be
good. Just be very careful getting it out. If you pull the plating
from the hole when you remove it, you'll have a problem. I have a
desoldering tool with a built in vacuum pump that makes it really
easy, before that sometime it was really hard.
Ira
--
You received this message because you are subscribed to the Google Groups
"Brewtus" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/brewtus?hl=en.
