@sc00bs thanks for the feedback @ Bruce Keeler You misunderstood the functioning of the boilers. At 220Volt there is steam boiler priority and this is not what you think. This is a huge mistake of expobar in my opinion for 220 volts circuits. I am very badly impressed you already needed 6 pressurstats. This is not good at all.... You could change the original pressurstat with a Parker or Sirai pressurstat that are high end products.... About your question for the PID: Βy increasing the steam temperature at the same time we increase the pressure. 0,9 bars are about 120 celsius and 1,3 bars are about 126 celsius. So you forget the adjustment of the bars and you go at further precise adjustments meaning you will know the exactly temperature of the steam boiler. The more temperature inside the boiler the more pressure inside the boiler. Also the PID has faster responsive from the bad quality original presurstat. Also you need 2 ssr to control both channels. Sorry for my English but i left USA before 18 years...
-- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
