Thank you Herman for the detailed answer! :)) сряда, 7 октомври 2015 г., 14:28:02 UTC+3, herman dickens написа: > > You don't have to remove the boiler. You do have to remove the cover on > the side of the machine where the water tank is stored. Three are two > phillips screws on top and 2 allen screws on the side. Once that cover is > removed you will be able to see the pump. there are mounts that hold the > pump in place that need to be removed. You may be able to get by with just > removing the mount on the outside and sliding the pump out once you unscrew > it. Good luck. > Herman > > On Wed, Oct 7, 2015 at 7:20 AM, espressofan2015 <[email protected] > <javascript:>> wrote: > >> Dear community, >> >> I asked WWL to explane is it necessary to umnount the brew boiler in >> order to change the vibration pump, but still get no answer. I saw that >> Todd replaces the vibration pump of a machine without a brew boiler. Do you >> have such experience in replacing the vibration pump? >> >> Thank you for your time and assistance! >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To post to this group, send email to [email protected] >> <javascript:>. >> Visit this group at http://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. >> > >
-- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
