Wll doesn't sell it but if I were you I would replace it with the Pid. I have a non-pid display that works if I can find it.
On Thu, May 12, 2016 at 4:12 PM, BklynJim <[email protected]> wrote: > > Hi guys, > The LCD readout on my non-pid temperature controller stopped working. The > machine still heats up but the display doesn't show anything. Sometimes > the display works when the machine is cold and then cuts out. It also > seems to be under temperature based on my instant thermometer reading from > the group head. Should I replace the non-pid controller or make the jump > to the GICAR pid? I just missed the WLL tech team for the day so I'll try > them again tomorrow but does anyone know if they still sell the non-pid > controller? Thanks for the advice. > Jim > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
