Hey Guys, I got the PID kit from WLL, wired it all up last night, turned on the machine and got a brief blue LCD light and then nothing. Then, when I went to shut off the machine, the power toggle switch exploded. I use a timer so I haven't used the switch in years. Hopefully the problem with the PID install is a loose wire. I found this switch on Amazon - looks right. Do you guys think it should work? http://www.amazon.com/KCD4-DPST-OFF-Rocker-Switch/dp/B00BQED790?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
On Friday, May 13, 2016 at 1:56:49 PM UTC-4, herman dickens wrote: > > Good luck. I took my thermocouple out when it was hot and had no problem. > Be sure if you do it that way to relieve the pressure on everything before > you try it. > h > > On Fri, May 13, 2016 at 10:29 AM, BklynJim <[email protected] > <javascript:>> wrote: > >> Thanks for the advice. I ordered the PID kit from WLL this morning. >> I'll let you know how it goes. >> >> On Thursday, May 12, 2016 at 6:37:26 PM UTC-4, BklynJim wrote: >>> >>> >>> Hi guys, >>> The LCD readout on my non-pid temperature controller stopped working. >>> The machine still heats up but the display doesn't show anything. >>> Sometimes the display works when the machine is cold and then cuts out. It >>> also seems to be under temperature based on my instant thermometer reading >>> from the group head. Should I replace the non-pid controller or make the >>> jump to the GICAR pid? I just missed the WLL tech team for the day so >>> I'll try them again tomorrow but does anyone know if they still sell the >>> non-pid controller? Thanks for the advice. >>> Jim >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To post to this group, send email to [email protected] >> <javascript:>. >> Visit this group at https://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
