I got the kit from wll and it was pretty easy but for several years I did service work so that probably helped. I've had 0 problems since I did the conversion. If you decide you don't want to go that route let me know and I will try to find the display. I highly recommend the pid though. It just works. I replaced my controller at the same time because I was having issues with that and I'm glad I did. My machine is as Brewtus II that's over 10 years old now. It's running better than it did when it was new. Herman
On Thu, May 12, 2016 at 7:49 PM, BklynJim <[email protected]> wrote: > Thanks Herman. I am leaning toward the PID but I'm also a bit worried > about running into problems with the project. I read your post about > putting in the PID and it seemed straight forward, but on a few of the > other posts I found, it seems people had trouble removing the thermocouple > or with the wiring. Did you get your conversion kit from WLL? Any pointers? > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
