Good luck. I took my thermocouple out when it was hot and had no problem. Be sure if you do it that way to relieve the pressure on everything before you try it. h
On Fri, May 13, 2016 at 10:29 AM, BklynJim <[email protected]> wrote: > Thanks for the advice. I ordered the PID kit from WLL this morning. I'll > let you know how it goes. > > On Thursday, May 12, 2016 at 6:37:26 PM UTC-4, BklynJim wrote: >> >> >> Hi guys, >> The LCD readout on my non-pid temperature controller stopped working. >> The machine still heats up but the display doesn't show anything. >> Sometimes the display works when the machine is cold and then cuts out. It >> also seems to be under temperature based on my instant thermometer reading >> from the group head. Should I replace the non-pid controller or make the >> jump to the GICAR pid? I just missed the WLL tech team for the day so >> I'll try them again tomorrow but does anyone know if they still sell the >> non-pid controller? Thanks for the advice. >> Jim >> > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
