I just shot you an email that should help. Let me know if there's anything else you need. Herman
On Sat, Aug 27, 2016 at 1:37 PM, StevieG. <[email protected]> wrote: > Hi folks - update: with a 17mm deep impact socket and a cordless impact >> wrench, the old temp probe came right out. >> > > WLL tech support informed me the probes for the old AKO's are no longer > available, so installing the PID. > > First problem - the unit and the wiring diagram in the instructions do not > look identical. On the unit, the F and N on the M2 block are reversed from > the drawing, and the drawing has no labels for the M1 block. > > Any guidance from those who have done the PID upgrade? > > > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
