This may sound crazy but give it a shot. Unplug the brew boiler and see if the pressure builds and then shuts off like normal. Once the steam pressure gets up the pressurestat should switch the power to the brew boiler. Make sure the gfi doesn't kick out with the brew boiler disconnected. If that works fine power down, plug the brew boiler in , then power back up and see what happens. H
On Sun, Aug 28, 2016 at 9:48 AM, StevieG. <[email protected]> wrote: > And I just checked them again :) - removed both wires to the limit > switches, connected them together, and issue persists. Did the limit > switches one at a time. > > Just checked Jaeger P-stat, appears to be normal with continuity between > terminal 1 and 2 (NC), no continuity between 1 and 4 (NO) and no continuity > between 2 (NC) and 4 (NO) > > Thanks! > Steve > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
