Espressoparts has the parts. Here's what I ordered
*Sproline Foam Knife 1 Steam Tip* EP_TX_FOAMKNIFE1 *La Marzocco 'GB-5/FB-80' Steam Wand* MZ_558 1 On Thu, Mar 16, 2017 at 8:40 PM, Eric S <[email protected]> wrote: > bmacpiper- > I tried working through all of that, but none of the links are active > anymore. I talked to WLL and Chris Coffee today, and neither one seems to > know what the thread size is. > > That's why I was hoping someone would have done it recently and could > point to the one that works. > > I have to think something will work. Espresso machines have changed a lot > 12years, but I can't believe the steam tips have :) > > Might just have to bite the bullet and try a couple. or just put a new > steam arm on so I know something will work. > > On Thursday, March 16, 2017 at 3:22:14 PM UTC-5, Eric S wrote: >> >> I know there was a lot of discussion 10 years ago about different tips on >> the original brewtus. >> >> Has anyone switched them out recently? No one seems to know what size >> they are, or what might fit. WLL only has the single hole tips now, but at >> one point there were many more options. >> Thanks >> > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
