Adapter: (there’s a post on this too—but it will seem like you’re stripping the brewtus wand the first time you install it, but it will not ruin the threads. After the first time, you’ll be able to install it with your fingers, and brewtus tips will still work fine also) https://www.chriscoffee.com/Adaptor-Converter-8-mm-Female-to-10-mm-Male-p/ot0980rla.htm <https://www.chriscoffee.com/Adaptor-Converter-8-mm-Female-to-10-mm-Male-p/ot0980rla.htm>
A bunch of tips: (read my posts—some of these will outrun your boiler) https://www.chriscoffee.com/searchresults.asp?Search=steam+tips&Submit= <https://www.chriscoffee.com/searchresults.asp?Search=steam+tips&Submit=> My favorite tip before getting a foam knife: https://www.chriscoffee.com/Isomac-New-2-Hole-Steam-Tip-p/ot09950vn.htm <https://www.chriscoffee.com/Isomac-New-2-Hole-Steam-Tip-p/ot09950vn.htm> Foam knife: https://www.espressoparts.com/sproline-foam-knife-1-steam-tip <https://www.espressoparts.com/sproline-foam-knife-1-steam-tip> Call espressoparts.com for the proper wand to fit the foam knife, the adapter above does not work. Vortex (I haven’t tried this one): https://www.espressoparts.com/sproline-vortex-steam-wand-tip <https://www.espressoparts.com/sproline-vortex-steam-wand-tip> Have fun! > On Mar 16, 2017, at 17:40, Eric S <[email protected]> wrote: > > bmacpiper- > I tried working through all of that, but none of the links are active > anymore. I talked to WLL and Chris Coffee today, and neither one seems to > know what the thread size is. > > That's why I was hoping someone would have done it recently and could point > to the one that works. > > I have to think something will work. Espresso machines have changed a lot > 12years, but I can't believe the steam tips have :) > > Might just have to bite the bullet and try a couple. or just put a new steam > arm on so I know something will work. > > On Thursday, March 16, 2017 at 3:22:14 PM UTC-5, Eric S wrote: > I know there was a lot of discussion 10 years ago about different tips on the > original brewtus. > > Has anyone switched them out recently? No one seems to know what size they > are, or what might fit. WLL only has the single hole tips now, but at one > point there were many more options. > Thanks > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To post to this group, send email to [email protected] > <mailto:[email protected]>. > Visit this group at https://groups.google.com/group/brewtus > <https://groups.google.com/group/brewtus>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
