THAT is caused by SCALE On Fri, Mar 23, 2018 at 5:28 AM, herman dickens <hermandick...@gmail.com> wrote:
> It sounds like you fixed it. > > On Fri, Mar 23, 2018 at 2:06 AM, Eric Christoffersen <zakt...@gmail.com> > wrote: > >> Got another one form wll. While waiting the brew pressure dropped to >> indicated 4 bar, water just pouring into drip tray. >> >> Installed the new unit and it also brewed with lower pressure, screwed it >> down all the way and got 8 bar. Over the next 4 days brew pressure rose >> until 12+ bar. I backed the screw back and now pressure is stable at 9bar. >> >> Wonder if this is caused by air? I sort of remember something similar >> when I replaced before. >> >> Anyway, all set no. >> >> I'd open the old one but my harbor freight snap ring pliers were >> destroyed in the attempt. >> >> On Thursday, February 1, 2018 at 2:55:07 PM UTC-8, Eric Christoffersen >> wrote: >> >>> >>> My Brewtus2 has a hole behind the drip tray to reach a flathead that >>> controls the brew pressure, along with a sticker telling me to never adjust >>> it myself. I replaced that manky broken original that was controlled with >>> plastic flathead some years ago with what looks like a nicer one that has a >>> metal flathead fitting. >>> >>> Today the new pressure control started failing, only getting an >>> indicated 5-6 bar. Bunch of water goes into the drip tray. >>> >>> The new pressure control looks like it could be disassembled if my >>> snapring plyers weren't broken but I'm wondering if someone can recommend a >>> better part that will last longer? >>> >>> Or do I just order a new one? >>> >>> Thanks, >>> Eric >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to brewtus+unsubscr...@googlegroups.com. >> To post to this group, send email to brewtus@googlegroups.com. >> Visit this group at https://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to brewtus+unsubscr...@googlegroups.com. > To post to this group, send email to brewtus@googlegroups.com. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To post to this group, send email to brewtus@googlegroups.com. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.