My Brewtus II brewgroup is hot to the touch after warmup without running any water through it.
On Thu, Oct 4, 2018 at 2:32 PM Richard <[email protected]> wrote: > I recently noticed that after my Brewtus II reached 201 F when first > turned on that the brewgroup was *not *hot to the touch. > After pulling a few ounces of water, the brewgroup heats up and stays hot > the rest of the day. > I have a PID and the Brewtus II is turned on in the morning by a timer. > > *Is this the normal operation?* > > I started to wonder if this was really a problem and reread the manual. > I found the following statement: > > "First, move the lever to full up position and let the pump run about 2 to > 4 ounces of water through the empty portafilter basket .... this step > preheats the cup and also > brings the brewgroup up to temperature ..." > > I looked at the Brewtus IV manual and found similar instructions. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
