That sounds great. A multimeter is a necessity. I also keep some of the Dow 111 food safe grease. That and a phillips screwdriver will handle most of what you need with the tools you already have.
Herman On Wed, Jul 22, 2020 at 10:58 AM Rizwan Naveed <[email protected]> wrote: > Gents.... I return bearing good news, and also as a way to thank you all > for your rapid, in depth, and considerate input. i report back also to > demystify any future owners about this topic. > > It turns out that Ira was right. What was the issue? There was no > issue..."The big take away is that the pump delivering 8 bar is standard > here. During the warm up period the boilers draw power away from the pump > at that time so it will register a bit lower until the boilers are at > temp/pressure" > > I am looking forward to be an overjoyed owner of a Brewtus, and hope to > learn its ins and outs, and give back to the community! > A final set of questions (happy to start new thread if that is the > preferred community discipline): > 1) Tools needed: What is the minimal set of tools to have to maintain this > machine? I just have a variable wrench and a set of basic torque thing + > wrench tips. Do I need a multimeter? anything else thats not in a standard > basic toolbox? > 2) Supplies needed: Have cafiza for monthly backflushes, anything else > needed on the cleaning consumables front? Any grease for the E61 lever, and > if so how often? > 3) Water requirements: i live in NYC, soft water <50ppm. What is a > relatively safe water setup thats low cost? I dont want to buy single use > plastic water bottles for this, but open to filter or similar systems you > guys used? plan to stick to reservoir for now. I am lost between the filter > pouches like BWT, Brita or jug based systems, or just straight tap...Just > want this baby to last forever... haha > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/fb3f1651-bf09-4762-8ba6-474f82c5d090o%40googlegroups.com > . > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CAM9mha02anZg6_RYRaeYCNPb2m9QNmqN9XxN_imx9eL41eP0Aw%40mail.gmail.com.
