For the plumbed model why not just run it from a bottle with a flojet? That’s what I’d do at least if I’m at a place where plumbing in is not an option... then again, maybe too many parts and too much room to take up...
On Mon, Jul 20, 2020 at 8:16 PM Ira <[email protected]> wrote: > Hello Rizwan, > > Monday, July 20, 2020, 8:07:53 PM, you wrote: > > > @Ira ofcourse several assumptions have been made around what the > > tech has tried, in my write up ... I would assume for example that > > the tech has tried setting the OPV past 8 bar and run the pump with > > a blind disk on the machine and checked the machines gauge, or with > > a PF gauge, he does not see pressure build past 8 bar. If he hadn’t > > adjusted OPV...well that would be a pleasant albeit embarrassing solution > > Yes, but one of my rules when troubleshooting is, when you've tried > everything that makes sense, start trying things that don't make > sense. People make mistakes and overlook obvious things all the time. > > -- Ira > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/brewtus/1289039509.20200720201632%40gmail.com > . > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CAPWf-70rDGKE8KOkk%3DuvaosAijUzOs8cJ0r1_PZYzegdS5cwZA%40mail.gmail.com.
