Randy, HRD needs to have a port number that you input from the keyboard.
Windows Plug -n- Pray detects a device that is plugged into a USB. It then sets the device port number and then loads a driver that is supplied when you load the SignalLink software into your computer. Your Signallink should have the cable connected and be turned on. Turn on your computer and then plug the cable into your USB port. If PnP detects the device, it will appear as a virtual port in the device manager (under Ports (COM & LPT)) and will indicate its port number. If no port is indicated, right click on Ports and select (Scan for hardware changes). If PnP does not find your hardware, something else is wrong. Give me a call if needed. 73 -- Roy Storey W5TKZ On Wed, Jan 21, 2015 at 12:12 PM, Randy Pugh via BVARC <[email protected]> wrote: > Does anyone know how to create a usb com port in windows 8.1?I recently > bought a signallink usb.HRD indicates radio not connected and the com port > is not found in device manager.I assume that I would have to create a com > port but dont know the steps to do so.Any info would be appreciated.73s de > AA5OA. > > _______________________________________________ > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > >
_______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
