Get SWR at 3 freqs. to get a feel for where the lowest SWR freq. might be.
Then you can change the loading coil tap or antenna length.
Gary
Sent with AquaMail for Android
http://www.aqua-mail.com
On January 8, 2017 3:56:23 PM Gayle Dotts via BVARC <[email protected]> wrote:
Almost finished my first home built 6 Meter antenna, 13.5 feet tall with
49" radials. This is coil loaded from the bottom 10 turns. The plans say
14GA coated wire and tap. I think the wire should be bare for the tap
(aligator clip) to connect to. Plans don"t say this. By the way SWR is way
high.3.0. Any advice.
Thanks,
Gayle
KF5LVZ
----------
_______________________________________________
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
_______________________________________________
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
