For SSB local and normal use, you want a horizontal antenna on 6…when the band opens, anything works…but for best SSB use, a H pol like a Halo or turnstile antenna for omni or yagi is best…
Chris From: BVARC [mailto:[email protected]] On Behalf Of Gayle Dotts via BVARC Sent: Monday, January 09, 2017 5:13 PM To: BRAZOS VALLEY AMATEUR RADIO CLUB <[email protected]> Cc: Gayle Dotts <[email protected]> Subject: Re: [BVARC] Home built 6 meter 5/8 wave vertical 6 Meter vertical completed. With BVARC help and info: new height legnth , new radials legnth, 1" wide x 5" long loading coil..... thank you! Currently bottom of antenna is up only 10 feet off ground (all the height I have at present). SWR...... shows 1.3 @ 50.125 with power set at 25% using LDG AT-100Pro Autotuner. No contacts heard but band may be quiet at the moment. I'm hoping for the best. Gayle KF5LVZ On Sun, Jan 8, 2017 at 3:56 PM, Gayle Dotts <[email protected]<mailto:[email protected]>> wrote: Almost finished my first home built 6 Meter antenna, 13.5 feet tall with 49" radials. This is coil loaded from the bottom 10 turns. The plans say 14GA coated wire and tap. I think the wire should be bare for the tap (aligator clip) to connect to. Plans don"t say this. By the way SWR is way high.3.0. Any advice. Thanks, Gayle KF5LVZ ________________________________ Cumulus Media Disclaimer This message contains confidential information and is intended only for the individual(s) named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.
_______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
