Can do! thanks KF5LVZ
On Mon, Jan 9, 2017 at 9:27 AM, Rick Hiller -- W5RH via BVARC < [email protected]> wrote: > Nothing to download. > > Use the ARRL Antenna Handbook...any version from 1960 thru present. > > Rick Hiller > *The Radio Hotel* -- W5RH > > > > On Mon, Jan 9, 2017 at 8:55 AM, Gayle Dotts via BVARC <[email protected]> > wrote: > >> Need loaded coil diameter info. Can't down load ARRL off the internet for >> loaded coil dimensions, all other ways weren't working either. On the 5/8 >> wave 6m antenna I did find something that said 10" dia??? - 5" tall with 14 >> GA wire. From the internet plans G3JVL I had gone off of it was more like >> 1/2"dia - 5"tall with 14 ga. Almost everything off the internet...height, >> radials, loded coil were wrong surprised it's made out of tubing they got >> right!! >> Can I get a verification on the 10" so I can refit it...Thanks on the >> other dimensions I will refit those too. You have been a Great help. >> >> Thanks, >> Gayle >> KF5LVZ >> >> On Sun, Jan 8, 2017 at 3:56 PM, Gayle Dotts <[email protected]> >> wrote: >> >>> Almost finished my first home built 6 Meter antenna, 13.5 feet tall with >>> 49" radials. This is coil loaded from the bottom 10 turns. The plans say >>> 14GA coated wire and tap. I think the wire should be bare for the tap >>> (aligator clip) to connect to. Plans don"t say this. By the way SWR is way >>> high.3.0. Any advice. >>> >>> Thanks, >>> Gayle >>> KF5LVZ >>> >> >> >> _______________________________________________ >> BVARC mailing list >> [email protected] >> http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org >> >> > > _______________________________________________ > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > >
_______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
