No, the guy clamps are what we're steering away from, if at all possible. The
"Chinese fingercuffs" as Rick Hiller coined them, would be a much better
solution, given the environment and the aesthetics.
Thanks Scott,
MarkK5MGJ
From: Scott Medbury via BVARC <[email protected]>
To: "bvarc@bvarc org" <[email protected]>; mark janzer <[email protected]>
Cc: Scott Medbury <[email protected]>
Sent: Thursday, May 18, 2017 12:26 PM
Subject: Re: [BVARC] MSWE - need preformed guy dead end grips
I have some heavyweight galvanized guy clamps that may fit the bill.
Will send more information later.
Scott KD5FBA
Sent from my Verizon 4G LTE DroidOn May 18, 2017 11:59 AM, mark janzer via
BVARC <[email protected]> wrote:
I'm looking for a couple 3/16" (red label) preformed galvanized steel guy
grips.
It appears Greybar may have them, but there must be some other local sources.
Maybe someone (on the list) has these gathering dust from their last tower
guying project.
These will be used for replacing the USS Cavalla wire antenna.
Thanks for the bandwidth,Mark K5MGJ
_______________________________________________
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Message delivered to [email protected]
_______________________________________________
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Message delivered to [email protected]
