The sub has galvanized clamps now and they are in poor shape. Home Depot has 
3/16" stainless clamps.The dead end grips only come in galvanized, from what 
I've found.
Mike, we'll go with your recommendation.
MarkK5MGJ

      From: Michael Monsour via BVARC <[email protected]>
 To: mark janzer <[email protected]>; BRAZOS VALLEY AMATEUR RADIO CLUB 
<[email protected]> 
Cc: Michael Monsour <[email protected]>
 Sent: Thursday, May 18, 2017 12:49 PM
 Subject: Re: [BVARC] MSWE - need preformed guy dead end grips
   
On the ends of the horizontal antenna mounts [ the huge ones that go to the 
transmitters] are stainless steel clamps
You do not want to use galv fittings
Mike Monsour

On Thu, May 18, 2017 at 12:40 PM, mark janzer via BVARC <[email protected]> wrote:

No, the guy clamps are what we're steering away from, if at all possible. The 
"Chinese fingercuffs" as Rick Hiller coined them, would be a much better 
solution, given the environment and the aesthetics.
Thanks Scott,
MarkK5MGJ

      From: Scott Medbury via BVARC <[email protected]>
 To: "bvarc@bvarc org" <[email protected]>; mark janzer <[email protected]> 
Cc: Scott Medbury <[email protected]>
 Sent: Thursday, May 18, 2017 12:26 PM
 Subject: Re: [BVARC] MSWE - need preformed guy dead end grips
  
I have some heavyweight galvanized guy clamps that may fit the bill.
Will send more information later.
Scott KD5FBA
Sent from my Verizon 4G LTE DroidOn May 18, 2017 11:59 AM, mark janzer via 
BVARC <[email protected]> wrote:

 I'm looking for a couple 3/16" (red label) preformed galvanized steel guy 
grips.
It appears Greybar may have them, but there must be some other local sources. 
Maybe someone (on the list) has these gathering dust from their last tower 
guying project.
These will be used for replacing the USS Cavalla wire antenna.
Thanks for the bandwidth,Mark K5MGJ
______________________________ _________________
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org
Message delivered to [email protected]


   
______________________________ _________________
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org
Message delivered to [email protected]



_______________________________________________
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Message delivered to [email protected]


   
_______________________________________________
BVARC mailing list
[email protected]
http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org
Message delivered to [email protected]

Reply via email to