I found four stainless steel cable clamps. [U bolts with saddle] If there is a picture, then I can locate stainless hardware which I think is also used to secure pretty wire rope fencing Mike Monsour
On Thu, May 18, 2017 at 12:59 PM, mark janzer via BVARC <[email protected]> wrote: > The sub has galvanized clamps now and they are in poor shape. Home Depot > has 3/16" stainless clamps. > The dead end grips only come in galvanized, from what I've found. > > Mike, we'll go with your recommendation. > > Mark > K5MGJ > > > ------------------------------ > *From:* Michael Monsour via BVARC <[email protected]> > *To:* mark janzer <[email protected]>; BRAZOS VALLEY AMATEUR RADIO CLUB < > [email protected]> > *Cc:* Michael Monsour <[email protected]> > *Sent:* Thursday, May 18, 2017 12:49 PM > > *Subject:* Re: [BVARC] MSWE - need preformed guy dead end grips > > On the ends of the horizontal antenna mounts [ the huge ones that go to > the transmitters] are stainless steel clamps > You do not want to use galv fittings > Mike Monsour > > On Thu, May 18, 2017 at 12:40 PM, mark janzer via BVARC <[email protected]> > wrote: > > No, the guy clamps are what we're steering away from, if at all possible. > The "Chinese fingercuffs" as Rick Hiller coined them, would be a much > better solution, given the environment and the aesthetics. > > Thanks Scott, > > Mark > K5MGJ > > > ------------------------------ > *From:* Scott Medbury via BVARC <[email protected]> > *To:* "bvarc@bvarc org" <[email protected]>; mark janzer <[email protected]> > *Cc:* Scott Medbury <[email protected]> > *Sent:* Thursday, May 18, 2017 12:26 PM > *Subject:* Re: [BVARC] MSWE - need preformed guy dead end grips > > I have some heavyweight galvanized guy clamps that may fit the bill. > > Will send more information later. > > Scott KD5FBA > > *Sent from my Verizon 4G LTE Droid* > On May 18, 2017 11:59 AM, mark janzer via BVARC <[email protected]> wrote: > > I'm looking for a couple 3/16" (red label) preformed galvanized steel guy > grips. > > It appears Greybar may have them, but there must be some other local > sources. Maybe someone (on the list) has these gathering dust from their > last tower guying project. > > These will be used for replacing the USS Cavalla wire antenna. > > Thanks for the bandwidth, > Mark > K5MGJ > > ______________________________ _________________ > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org > <http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org> > Message delivered to [email protected] > > > > ______________________________ _________________ > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org > <http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org> > Message delivered to [email protected] > > > _______________________________________________ > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to [email protected] > > > > _______________________________________________ > BVARC mailing list > [email protected] > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to [email protected] > >
_______________________________________________ BVARC mailing list [email protected] http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to [email protected]
