Mark if you can use another hand I am available to help on Sunday. Keith Stolle Ke5ith
> On May 18, 2017, at 3:22 PM, mark janzer via BVARC <bvarc@bvarc.org> wrote: > > I've gotten a spool of stainless cable and the stainless wire rope clamps and > thimbles. > AUWC has the long ladder. > > We're set. > > 73 > Mark > K5MGJ > > > From: Michael Monsour <msi...@gmail.com> > To: mark janzer <k5...@yahoo.com>; BRAZOS VALLEY AMATEUR RADIO CLUB > <bvarc@bvarc.org> > Sent: Thursday, May 18, 2017 2:47 PM > Subject: Re: [BVARC] MSWE - need preformed guy dead end grips > > I found four stainless steel cable clamps. [U bolts with saddle] > If there is a picture, then I can locate stainless hardware which I think is > also used to secure pretty wire rope fencing > Mike Monsour > > On Thu, May 18, 2017 at 12:59 PM, mark janzer via BVARC <bvarc@bvarc.org> > wrote: > The sub has galvanized clamps now and they are in poor shape. Home Depot has > 3/16" stainless clamps. > The dead end grips only come in galvanized, from what I've found. > > Mike, we'll go with your recommendation. > > Mark > K5MGJ > > > From: Michael Monsour via BVARC <bvarc@bvarc.org> > To: mark janzer <k5...@yahoo.com>; BRAZOS VALLEY AMATEUR RADIO CLUB > <bvarc@bvarc.org> > Cc: Michael Monsour <msi...@gmail.com> > Sent: Thursday, May 18, 2017 12:49 PM > > Subject: Re: [BVARC] MSWE - need preformed guy dead end grips > > On the ends of the horizontal antenna mounts [ the huge ones that go to the > transmitters] are stainless steel clamps > You do not want to use galv fittings > Mike Monsour > > On Thu, May 18, 2017 at 12:40 PM, mark janzer via BVARC <bvarc@bvarc.org> > wrote: > No, the guy clamps are what we're steering away from, if at all possible. The > "Chinese fingercuffs" as Rick Hiller coined them, would be a much better > solution, given the environment and the aesthetics. > > Thanks Scott, > > Mark > K5MGJ > > > From: Scott Medbury via BVARC <bvarc@bvarc.org> > To: "bvarc@bvarc org" <bvarc@bvarc.org>; mark janzer <k5...@yahoo.com> > Cc: Scott Medbury <smedb...@windstream.net> > Sent: Thursday, May 18, 2017 12:26 PM > Subject: Re: [BVARC] MSWE - need preformed guy dead end grips > > I have some heavyweight galvanized guy clamps that may fit the bill. > > Will send more information later. > > Scott KD5FBA > > Sent from my Verizon 4G LTE Droid > On May 18, 2017 11:59 AM, mark janzer via BVARC <bvarc@bvarc.org> wrote: > I'm looking for a couple 3/16" (red label) preformed galvanized steel guy > grips. > > It appears Greybar may have them, but there must be some other local sources. > Maybe someone (on the list) has these gathering dust from their last tower > guying project. > > These will be used for replacing the USS Cavalla wire antenna. > > Thanks for the bandwidth, > Mark > K5MGJ > ______________________________ _________________ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org > Message delivered to k5...@yahoo.com > > > > ______________________________ _________________ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org > Message delivered to msi...@gmail.com > > > ______________________________ _________________ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org > Message delivered to k5...@yahoo.com > > > > ______________________________ _________________ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/ listinfo/bvarc_bvarc.org > Message delivered to msi...@gmail.com > > > > > _______________________________________________ > BVARC mailing list > BVARC@bvarc.org > http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org > Message delivered to ke...@ke5ith.com
_______________________________________________ BVARC mailing list BVARC@bvarc.org http://mail.bvarc.org/mailman/listinfo/bvarc_bvarc.org Message delivered to arch...@mail-archive.com