> in and out.
The Precourt fittings allow that adjustment quite easily. Not quite as
easily as the Highfield levers, but lots less banging around.
> Also, what is the replacement frequency? At Key West two years ago,
> the Samson vendor said that he knew the F-boats were using these for
> shrouds, but recommended change out on an annual basis. Yep, every
> year. Apparently UV degradation was the issue.
UV degradation is an issue. But since 3/8 inch Technora is way
oversize, the one year limitation is probably unneccesarily conservative. 2
to 3 years might be about right. These darkly pigmented lines probably
protect themselves somewhat, as well. Mike Leneman has a more specific
analysis of this.
> Anyone taken a two year old set and tested them to see what
> breaking strength was, compared to new rating?
Great idea. I would like to see this test done on the whole assembly
to test the splices and fittings as well. I am due for a new set in a while.
I will donate the old ones to someone who would test them. Any takers?
Peter Lucas
F/C 31 UC #225 "Flexible Flyer"
San Diego, California
| Yahoo! Groups Sponsor | |
|
|
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/F-Boats/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
