Kaj,

A quick Google search reveals all...

https://www.xilinx.com/support/university/boards-portfolio/xup-boards/RFSoC2x2.html


-----Original Message-----
From: Kaj Wiik <[email protected]> 
Sent: Tuesday, March 9, 2021 7:21 AM
To: [email protected]
Subject: [EXT]Re: [casper] low cost academic xilinx RFSOC board - feb 28 
tutorial 8am pacific

External Email

Hi!

Did the tutorial reveal any further info (spec sheet, availability) of this 
board?

Thanks,
Kaj


On 16/02/2021 16:36, Francois Kapp wrote:
> Hi Colm,
> 
> We discussed this and it appears that only two of the ADC's and DAC's 
> will be routed to connectors, hence the 2x2.  Dan has already asked 
> Xilinx whether there is any scope to bring additional channels out to 
> headers or other low cost connectors.  We await an answer.
> 
> Regards,
> Francois
> 
> On Tue, 16 Feb 2021 at 13:45, Colm Bracken <[email protected] 
> <mailto:[email protected]>> wrote:
> 
>     Hi Dan,
> 
>     Thanks for the info.
>     Do you happen to know what the '2x2' signifies in the name RF SoC 2x2?
>     I was thinking 2 DACs and 2 ADCs, but you mentioned that it will have the
>     XCZU28DR chip which hosts 8 ADCS and 8 DACs.
>     Looking forward to learning more about this board!
> 
>     Thanks,
>     Colm
> 
>     On Wed, 10 Feb 2021 at 19:01, Dan Werthimer <[email protected]
>     <mailto:[email protected]>> wrote:
> 
> 
> 
>         dear casper community,
> 
>         please see email below from xilinx's patrick lysaght,
>         about their new low cost RFSOC board for academia,
>         and the february 28 tutorial about this board.
> 
>         best wishes,
> 
>         dan
> 
>         ---------- Forwarded message ---------
>         Date: Wed, Feb 10, 2021 at 10:00 AM
>         Subject: Emailing: isfpga_rfsoc_2x2_tutorial.jpg
> 
> 
>           Dear Friends
> 
>         I hope you are all doing well in 2021.  I have some good news that I
>         would like to share with you.  At the end of Feb, we will launch a new
>         RFSoC platform for academia.  It features a new board, the RFSoC 2x2,
>         supported with open source designs and teaching material.  We will be
>         hosting a tutorial on Sunday 28th Feb from 8 - 10 AM PST as part of 
> the
>         ISFPGA 2021 conference (https://isfpga.org/ <https://isfpga.org/>) to
>         announce and introduce the new RFSoC 2x2 platform.  Everyone is 
> welcome
>         to attend the tutorial and registration is free for students.
> 
>         Would you kindly share this invitation with the CASPER community?  For
>         those who would like to attend, links to the tutorial site and the
>         registration pages are provided below.  I have also attached a graphic
>         summarizing the tutorial.
> 
>         Best .. Patrick
> 
>         More details ...
>         A Low-Cost Teaching and Research Platform Based on Xilinx RFSoC
>         Technology and the PYNQ Framework
>         Time: February 28, 8:00 AM - 10:00 AM PST
>         Organizer: Patrick Lysaght (Xilinx), Robert W. Stewart 
> (Strathclyde)
> 
>         The Xilinx Zynq(r) UltraScale+(tm) RFSoC architecture integrates ZU+
>         MPSoCs with state-of-the-art, analog-to-digital (ADC) and
>         digital-to-analog (DAC) data converters. The combination of banks of
>         high-precision data converters, capable of processing multi giga 
> samples
>         of data per second, along with FPGA fabric and ARM processors creates 
> a
>         uniquely powerful family architecture.  RFSoC technology re-defines 
> what
>         is possible in applications such as software defined radio (SDR) and
>         advanced instrumentation.
>         This tutorial introduces a new low-cost teaching and research platform
>         for RFSoC, designed especially for academia. The platform exploits the
>         PYNQ open-source framework to provide a highly intuitive user system
>         interface incorporating Linux, Python and Jupyter notebooks. It also
>         comes with a suite of open-source teaching resources including videos,
>         notebooks and design examples.
>         We will demonstrate the benefits of integrating direct RF sampling 
> data
>         converters by introducing  a novel, open-source spectrum analyzer 
> built
>         using the new board. This RFSoC design exploits advanced signal
>         processing techniques, including higher-order Nyquist zones, to
>         demonstrate performance that has only previously been achieved on very
>         high-end instrumentation. Using the spectrum analyzer example, we will
>         also demonstrate new approaches to the rapid prototyping of graphical
>         user interfaces for research demonstrators.
> 
>         Links ...
>         ISFPGA tutorial page: http://bit.ly/ISFPGA_rfsoc2x2
>         <http://bit.ly/ISFPGA_rfsoc2x2>
>         Register for ISFPGA & tutorial here: http://bit.ly/ISFPGA_rfsoc2x2
>         <http://bit.ly/ISFPGA_rfsoc2x2> #Xilinx #RFSoC
> 
> 
> 
> 
>         This email and any attachments are intended for the sole use of the
>         named recipient(s) and contain(s) confidential information that may be
>         proprietary, privileged or copyrighted under applicable law. If you 
> are
>         not the intended recipient, do not read, copy, or forward this email
>         message or any attachments. Delete this email message and any
>         attachments immediately.
> 
>         -- 
>         You received this message because you are subscribed to the Google
>         Groups "[email protected] <mailto:[email protected]>" 
> group.
>         To unsubscribe from this group and stop receiving emails from it, send
>         an email to [email protected]
>         <mailto:[email protected]>.
>         To view this discussion on the web visit
>         
> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAGHS_vHaL9wJFZjVWYoXPTZfwm%2BE%2BNJPd8QVifZ6-MqhgNX6BQ%40mail.gmail.com
>         
> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAGHS_vHaL9wJFZjVWYoXPTZfwm%2BE%2BNJPd8QVifZ6-MqhgNX6BQ%40mail.gmail.com?utm_medium=email&utm_source=footer>.
> 
> 
> 
>     --
> 
>     *Dr Colm Bracken*
>     Lecturer
>     Maynooth University Experimental Physics
> 
> 
>     Maynooth University, Maynooth, Co. Kildare, Ireland.
> 
>     T: +353 1 708 3641
>     E: [email protected] <mailto:[email protected]> W:
>     www.maynoothuniversity.ie <http://www.maynoothuniversity.ie>
> 
>     Follow my work on https://nuim.academia.edu/ColmBracken
>     <https://nuim.academia.edu/ColmBracken>
> 
>     And
> 
> 
>     Research Associate
> 
>     Astronomy & Astrophysics Section
>     School of Cosmic Physics
>     Dublin Institute for Advanced Studies
>     31 Fitzwilliam Place
>     Dublin 2, D02 XF86
> 
> 
> 
>     T: +353 1 440 6656 ext 352
>     E: [email protected] <mailto:[email protected]> W:
>     www.dias.ie/2017/06/22/dr-colm-bracken
>     <https://www.dias.ie/2017/06/22/dr-colm-bracken>
> 
>     Follow my work on https://nuim.academia.edu/ColmBracken
>     <https://nuim.academia.edu/ColmBracken>
> 
>     -- 
>     You received this message because you are subscribed to the Google Groups
>     "[email protected] <mailto:[email protected]>" group.
>     To unsubscribe from this group and stop receiving emails from it, send an
>     email to [email protected]
>     <mailto:[email protected]>.
>     To view this discussion on the web visit
>     
> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAEx9wh-fKiwL4k619r7CSkG9aij%2B5pgTQ6Gkr7ntmR7SZQmHig%40mail.gmail.com
>     
> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAEx9wh-fKiwL4k619r7CSkG9aij%2B5pgTQ6Gkr7ntmR7SZQmHig%40mail.gmail.com?utm_medium=email&utm_source=footer>.
> 
> --
> You received this message because you are subscribed to the Google 
> Groups "[email protected]" group.
> To unsubscribe from this group and stop receiving emails from it, send 
> an email to [email protected]
> <mailto:[email protected]>.
> To view this discussion on the web visit 
> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAB4_c0r
> tiO0dZuLVX3CGMTd4-bO9fyR9Jn5Bbwfbhz-i-FB78Q%40mail.gmail.com
> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAB4_c0rtiO0dZuLVX3CGMTd4-bO9fyR9Jn5Bbwfbhz-i-FB78Q%40mail.gmail.com?utm_medium=email&utm_source=footer>.

--
You received this message because you are subscribed to the Google Groups 
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/fbf9d791-eec5-6297-7173-98dc1e3c89d9%40utu.fi.

-- 
You received this message because you are subscribed to the Google Groups 
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/BY5PR19MB31282AFD96803C52D5C89C51AB929%40BY5PR19MB3128.namprd19.prod.outlook.com.

Reply via email to