I recommend downgrading to 12.2(46)SE. The command structure on your current version is different than the lab. instead of "dot1x port-control auto" it is "authentication port-control auto"
Regards, Tyson Scott - CCIE #13513 R&S, Security, and SP Managing Partner / Sr. Instructor - IPexpert, Inc. Mailto: [email protected] Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (R&S, Voice, Security & Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jason Maynard Sent: Wednesday, September 08, 2010 5:47 PM To: 'Winston Lee'; [email protected] Subject: Re: [OSL | CCIE_RS] BLS 4.0 Vol 1 Lab 2 Is the port statically configured as an access port switchport mode access -----Original Message----- From: Winston Lee [mailto:[email protected]] Sent: September-08-10 5:41 PM To: Jason Maynard; [email protected] Subject: Re: [OSL | CCIE_RS] BLS 4.0 Vol 1 Lab 2 Thanks Jason, but it's still giving me issues, do i need to reboot? Cat3560-2(config)#dot1x sys Cat3560-2(config)#dot1x system-auth-control Cat3560-2(config)#int fas1/0/6 Cat3560-2(config-if)#d? dampening default delay description down-when-looped duplex Cat3560-2(config-if)#dot1x port-control auto ^ % Invalid input detected at '^' marker. ----- Original Message ---- From: Jason Maynard <[email protected]> To: Winston Lee <[email protected]>; [email protected] Sent: Wed, September 8, 2010 4:35:58 PM Subject: RE: [OSL | CCIE_RS] BLS 4.0 Vol 1 Lab 2 You need to enable it first Global config - dot1x system-auth-control -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Winston Lee Sent: September-08-10 5:33 PM To: [email protected] Subject: [OSL | CCIE_RS] BLS 4.0 Vol 1 Lab 2 Section 2.10 and 2.11 I am trying to perform section 2.10 and 2.11 to enable dot1x on port fa0/6 and fa0/18. I'm using a 3750 as my switch, with c3750-ipservicesk9-mz.122-55.SE.bin running. I have the following dot1x configuration in place: aaa new-model aaa authentication dot1x default none aaa session-id common When I attempt to enable dot1x on the interface level, it doesn't give me the option to do it. Can anyone tell me what I'm missing here? Cat3560-2(config)#int fa1/0/6 Cat3560-2(config-if)#d? dampening default delay description down-when-looped duplex Cat3560-2(config-if)#dot1x port-control auto ^ % Invalid input detected at '^' marker. Cat3560-2#sh run int fa1/0/6 Building configuration... Current configuration : 85 bytes ! interface FastEthernet1/0/6 description R6 Fa0/0 switchport access vlan 567 end _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
