1) enable "no auto-summary" in the RIP process
2) make sure "ip classless" is enabled globally
Please try these and let me know
Thanks,
Pouya.
________________________________
From: Kingsley Charles <[email protected]>
To: Marko Milivojevic <[email protected]>
Cc: [email protected]
Sent: Friday, October 14, 2011 8:39 PM
Subject: Re: [OSL | CCIE_Security] Redistributing static route in RIP
Marko, here is my config:
R1
Router(config)#ip route 10.20.30.0 255.255.255.0 20.10.30.40
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 10.0.0.0
Router(config-router)#redistribute static
R2
Router(config)#router rip
Router(config-router)#version 2
Router(config-router)#network 10.0.0.0
With regards
Kings
On Sat, Oct 15, 2011 at 4:46 AM, Marko Milivojevic <[email protected]> wrote:
Could you please post the relevant configurations...
>
>--
>Marko Milivojevic - CCIE #18427
>Senior Technical Instructor - IPexpert
>
>FREE CCIE training: http://bit.ly/vLecture
>
>Mailto: [email protected]
>Telephone: +1.810.326.1444
>Web: http://www.ipexpert.com/
>
>
>On Fri, Oct 14, 2011 at 00:02, Kingsley Charles
><[email protected]> wrote:
>> It is normal configured static routes.
>>
>> I checked the peer's routing table and debug ip rip.
>>
>> With regards
>> Kings
>>
>> On Fri, Oct 14, 2011 at 11:28 AM, Piotr Matusiak <[email protected]> wrote:
>>>
>>> Is it 'normal' static or injected?
>>> how do you see that this is not working?
>>> do you see that prefix in sho ip rip data?
>>>
>>> Regards,
>>> Piotr
>>>
>>>
>>> 2011/10/14 Kingsley Charles <[email protected]>
>>>>
>>>> But it is the "T" in the lab :-)
>>>>
>>>> Thanks...
>>>>
>>>>
>>>> With regards
>>>> Kings
>>>>
>>>> On Thu, Oct 13, 2011 at 8:27 PM, Steve Di Bias <[email protected]> wrote:
>>>>>
>>>>> Works OK on 12.4(24)T2. Upgrade? It is a "T" version after all ;)
>>>>>
>>>>> On Thu, Oct 13, 2011 at 4:29 AM, Kingsley Charles
>>>>> <[email protected]> wrote:
>>>>>>
>>>>>> Hi all
>>>>>>
>>>>>> With 12.4(15)T13, I am not able to redistribute static routes into RIP.
>>>>>> Tried configuring with metrics also.
>>>>>>
>>>>>> Any known issues?
>>>>>>
>>>>>> With regards
>>>>>> Kings
>>>>>>
>>>>>> _______________________________________________
>>>>>> For more information regarding industry leading CCIE Lab training,
>>>>>> please visit www.ipexpert.com
>>>>>>
>>>>>> Are you a CCNP or CCIE and looking for a job? Check out
>>>>>> www.PlatinumPlacement.com
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> -Steve Di Bias
>>>>
>>>>
>>>> _______________________________________________
>>>> For more information regarding industry leading CCIE Lab training, please
>>>> visit www.ipexpert.com
>>>>
>>>> Are you a CCNP or CCIE and looking for a job? Check out
>>>> www.PlatinumPlacement.com
>>>
>>
>>
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
