That was taken care... Thx
With regards Kings On Sat, Oct 15, 2011 at 2:52 PM, Pouya Taaghol <[email protected]> wrote: > One last comment, make sure that the router has an active interface towards > the next hop that is in the same subnet as the next hub otherwise the static > route won't install in the routing table > > Sent from my iPhone > > On Oct 15, 2011, at 1:18 AM, Pouya Taaghol <[email protected]> wrote: > > 1) enable "no auto-summary" in the RIP process > 2) make sure "ip classless" is enabled globally > > Please try these and let me know > > Thanks, > Pouya. > > ------------------------------ > *From:* Kingsley Charles <[email protected]> > *To:* Marko Milivojevic <[email protected]> > *Cc:* <[email protected]>[email protected] > *Sent:* Friday, October 14, 2011 8:39 PM > *Subject:* Re: [OSL | CCIE_Security] Redistributing static route in RIP > > Marko, here is my config: > > R1 > > Router(config)#ip route 10.20.30.0 255.255.255.0 20.10.30.40 > Router(config)#router rip > Router(config-router)#version 2 > Router(config-router)#network 10.0.0.0 > Router(config-router)#redistribute static* > > R2 > * > Router(config)#router rip > Router(config-router)#version 2 > Router(config-router)#network 10.0.0.0* > > *With regards > Kings* > * > > > > On Sat, Oct 15, 2011 at 4:46 AM, Marko Milivojevic < <[email protected]> > [email protected]> wrote: > > Could you please post the relevant configurations... > > -- > Marko Milivojevic - CCIE #18427 > Senior Technical Instructor - IPexpert > > FREE CCIE training: <http://bit.ly/vLecture>http://bit.ly/vLecture > > Mailto: <[email protected]>[email protected] > Telephone: +1.810.326.1444 > Web: <http://www.ipexpert.com/>http://www.ipexpert.com/ > > On Fri, Oct 14, 2011 at 00:02, Kingsley Charles > < <[email protected]>[email protected]> wrote: > > It is normal configured static routes. > > > > I checked the peer's routing table and debug ip rip. > > > > With regards > > Kings > > > > On Fri, Oct 14, 2011 at 11:28 AM, Piotr Matusiak < <[email protected]> > [email protected]> wrote: > >> > >> Is it 'normal' static or injected? > >> how do you see that this is not working? > >> do you see that prefix in sho ip rip data? > >> > >> Regards, > >> Piotr > >> > >> > >> 2011/10/14 Kingsley Charles < <[email protected]> > [email protected]> > >>> > >>> But it is the "T" in the lab :-) > >>> > >>> Thanks... > >>> > >>> > >>> With regards > >>> Kings > >>> > >>> On Thu, Oct 13, 2011 at 8:27 PM, Steve Di Bias < <[email protected]> > [email protected]> wrote: > >>>> > >>>> Works OK on 12.4(24)T2. Upgrade? It is a "T" version after all ;) > >>>> > >>>> On Thu, Oct 13, 2011 at 4:29 AM, Kingsley Charles > >>>> < <[email protected]>[email protected]> wrote: > >>>>> > >>>>> Hi all > >>>>> > >>>>> With 12.4(15)T13, I am not able to redistribute static routes into > RIP. > >>>>> Tried configuring with metrics also. > >>>>> > >>>>> Any known issues? > >>>>> > >>>>> With regards > >>>>> Kings > >>>>> > >>>>> _______________________________________________ > >>>>> For more information regarding industry leading CCIE Lab training, > >>>>> please visit <http://www.ipexpert.com>www.ipexpert.com > >>>>> > >>>>> Are you a CCNP or CCIE and looking for a job? Check out > >>>>> <http://www.PlatinumPlacement.com>www.PlatinumPlacement.com > >>>> > >>>> > >>>> > >>>> -- > >>>> -Steve Di Bias > >>> > >>> > >>> _______________________________________________ > >>> For more information regarding industry leading CCIE Lab training, > please > >>> visit <http://www.ipexpert.com>www.ipexpert.com > >>> > >>> Are you a CCNP or CCIE and looking for a job? Check out > >>> <http://www.PlatinumPlacement.com>www.PlatinumPlacement.com > >> > > > > > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit <http://www.ipexpert.com>www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > <http://www.PlatinumPlacement.com>www.PlatinumPlacement.com > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit <http://www.ipexpert.com>www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > <http://www.PlatinumPlacement.com>www.PlatinumPlacement.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
